Search results for "thermogravimetric analysis"
showing 10 items of 212 documents
Effect of polyethelene oxide on the thermal degradation of cellulose biofilm - Low cost material for soft tissue repair in dentistry
2016
Background Bio cellulose is a byproduct of sweet tea fermentation known as kombusha. During the biosynthesis by bacteria cellulose chains are polymerized by enzyme from activated glucose. The single chains are then extruded through the bacterial cell wall. Interestingly, a potential of the Kombucha's byproduct bio cellulose (BC) as biomaterial had come into focus only in the past few decades. The unique physical and mechanical properties such as high purity, an ultrafine and highly crystalline network structure, a superior mechanical strength, flexibility, pronounced permeability to gases and liquids, and an excellent compatibility with living tissue that reinforced by biodegradability, bio…
Electrical conductivity and strong luminescence in copper Iodide double chains with isonicotinato derivatives
2015
Direct reactions between CuI and isonicotinic acid (HIN) or the corresponding esters, ethyl isonicotinate (EtIN) or methyl isonicotinate (MeIN), give rise to the formation of the coordination polymers [CuI(L)] with L=EtIN (1), MeIN (2) and HIN (3). Polymers 1-3 show similar structures based on a CuI double chain in which ethyl-, methyl isonicotinate or isonicotinic acid are coordinated as terminal ligands. Albeit, their supramolecular architecture differs considerably, affecting the distances and angles of the central CuI double chains and thereby their physical properties. Hence, the photoluminescence shows remarkable differences; 1 and 2 show a strong yellow emission, whereas 3 displays a…
The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of PMMA
2012
Abstract Silica–PMMA nanocomposites with different silica quantities were prepared by a melt compounding method. The effect of silica amount, in the range 1–5 wt.%, on the morphology, mechanical properties and thermal degradation kinetics of PMMA was investigated by means of transmission electron microscopy (TEM), X-ray diffractometry (XRD), dynamic mechanical analysis (DMA), thermogravimetric analyses (TGA), Fourier-transform infrared spectroscopy (FTIR), 13 C cross-polarization magic-angle spinning nuclear magnetic resonance spectroscopy ( 13 C{ 1 H} CP-MAS NMR) and measures of proton spin-lattice relaxation time in the rotating frame ( T 1 ρ ( H )), in the laboratory frame ( T 1 ( H )) a…
Characterization of thermoelectric and thermogravimetric properties of conductive PEDOT:PSS films blended with SWCNTs and PVA
2019
Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) was blended with polyvinyl alcohol (PVA) and single-walled carbon nanotube (SWCNT) filler to form composites with thermoelectric properties. Studied samples were obtained by drop coating and solution casting methods. Thermoelectric measurements of PEDOT:PSS demonstrated that the addition of 5 wt. % SWCNTs increased the Seebeck coefficient value from 8.0 μV/K to 23.6 μV/K, while in the case of PEDOT:PSS/PVA blended with 5 wt. % SWCNT Seebeck coefficient value of 20.3 μV/K was achieved. Thermogravimetric analysis showed slight SWCNT effect on thermal stability of the investigated systems.
From Layered Molybdic Acid to Lower-Dimensional Nanostructures by Intercalation of Amines under Ambient Conditions
2006
Nanostructures of varied dimensionality such as rods, scrolls, and disks of molybdenum oxide have been synthesized in gram quantities under ambient conditions using exfoliation of the layers as a synthetic tool. Intercalation of alkylamines (CnH2n+2NH2, where n = 3, 4, 8, 12, and 16) into yellow molybdic acid (MoO3·2H2O) and subsequent treatment with nitric acid resulted in molybdenum oxide nanorods, nanodisks, or oxide−amine composite nanorods. The sizes of the nanoparticles range from a few nanometers to micrometers in length and 10 to 200 nm in diameter. Detailed X-ray, scanning electron microscopy, and transmission electron microscopy analyses reveal an inverse relation between the size…
Incorporation of Silica Nanospherical Particles into Epoxy-Amine Crosslinked Materials
2008
Composites of silica nanospheres coated with crosslinked epoxy–amine were synthesised and examined by 29Si-magic-angle-spinning nuclear magnetic resonance spectroscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The most representative fact is that epoxy-modified nanospheres lost less weight at high temperatures. At temperatures greater than 300°C the loss of weight for epoxy-modified nanospheres was rather lower than for unmodified nanospheres. This helped them to retain their structures, as the loss of weight can have adverse effects on network defects, due to the loss of crosslinks by unit of volume.
Sol-gel derived anatase TiO2: morphology and photoactivity
1994
Abstract High-surface area TiO 2 (anatase) was prepared by the sol-gel method and characterized by various instrumental and analytical methods, including X-ray diffraction, thermogravimetric analysis, infrared spectroscopy, porosimetry, specific surface area measurements, scanning electron microscopy, and titration of surface hydroxyl groups. The specimen was tested for photodegradation of phenol and nitrophenols carried out in aqueous suspension at pH = 3; photoactivity was compared with that of commercially available anatase TiO 2 . Results are discussed in terms of porosity, surface area, and availability and population of surface OH groups, consequent upon the particular method used for…
Undecylenic acid: A tunable bio-based synthon for materials applications
2016
International audience; An undecylenic acid-based monoglyceride prepared from glycidol and undecylenic acid is used as suitable and tunable synthon for polymerization applications. Epoxidation and acrylation reactions lead to photopolymerizable monomers while transesterification with dimethyl carbonate, metathesis and aminolysis reactions provide access to polyhydroxyurethane-based materials. The successive intermediates were synthesized according to a green chemistry approach implicating solvent-less and catalyzed reactions, and were at each step fully characterized by infrared, 1H and 13C{1H} NMR spectroscopy, elemental analysis and mass spectrometry. Analyses of the resulting polymer mat…
Upgrade of citrus waste as a biofuel via slow pyrolysis
2015
Abstract Slow pyrolysis (200–650 °C) experiments on citrus residues (orange peel waste “OP” and lemon peel waste “LP”) were carried out in lab scale fixed bed batch reactor. Bio-oil and bio-char obtained by thermal degradation are more stable, more homogeneous and higher energy content fuels when compared to the parent feedstock. Thermogravimetric analysis (TGA) showed higher stability of LP waste, which appears related to the higher lignin content . Mass and energy yields of solid and liquid products (i.e., char and oil) were measured to determine the effects of peak temperature on feedstock. A linear correlation between Gross Calorific Value (GCV), peak temperatures and mass loss (ML) all…
Ceria-based electrolytes prepared by solution combustion synthesis: The role of fuel on the materials properties
2016
Ce0.8Sm0.2O2 â xpowders were synthesized by solution combustion synthesis using citric acid, cellulose and sucrose as single, or intimately mixed, fuels. The powders were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, N2sorption at â196 °C, H2-temperature programmed reduction and thermogravimetric analyses. Textural properties of the powders were shaped by the peculiar employed fuel. The study of reducibility revealed that oxygen vacancies formation is mainly influenced by both parameters, specific surface area and total pore volume. The different tendency toward reduction played a key role in sintering under reducing atmosphe…